From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
Thank you for your request. R&D has read this suggestion and it will be included in feature planning discussions for future DIAdem versions. But because of the huge numbers of possible DIAdem extensions and the fact that just a few sponsors are supporting it, we gave this request a very low priority.
Greetings
Walter
Hi,
At present there are a number of ways to apply Y-Axes to a collection of curves on a 2D Curve chart, as shown:
But my colleagues and I think it would be useful if there could be a button that generated an axis per unit type (e.g. Volts, Amps, DegC). That way like curves can be compared on the same axis without the distortion of larger number curves skewing the perspective of the axis.
This is an AWESOME idea. Would love to take it one step further. I have pressure transducers that are high pressure and low pressure. Even though all are in PSI, would be great to be able to group the lows and group the high's on separate charts. Viewing 9 separate Y axes right now at the same time isn't very good...though its a good excuse to need a larger monitor.
I haven't used the curve related scaling much. I'll have to spend more time with it. I have usually avoided setting manual scale because as I scan left and right along the X Time axis the Y scales need to adjust quite a lot. One of the reasons I love the auto-scale in View. Just always have to watch out that the 1" movement on the screen is .1 psi or 10 psi when making evaluations! Thanks Marcus.
Thank you for your request. R&D has read this suggestion and it will be included in feature planning discussions for future DIAdem versions. But because of the huge numbers of possible DIAdem extensions and the fact that just a few sponsors are supporting it, we gave this request a very low priority.
Hello
Thank you for your request. R&D has read this suggestion and it will be included in feature planning discussions for future DIAdem versions. But because of the huge numbers of possible DIAdem extensions and the fact that just a few sponsors are supporting it, we gave this request a very low priority.
Greetings
Walter