Multisim and Ultiboard

cancel
Showing results for 
Search instead for 
Did you mean: 

motor

Hello. I would like to know, how to compute parameters for Induction Machine Squirrel Cage in order, to get specific power. For example 100 watts. I meassured about 3kW on default model.

 

Can anyone please help me?

 

Thank you!

0 Kudos
Message 1 of 10
(6,118 Views)

Hi Nedelka,

 

                    You can try and refer to the following document that is providing the ecuations for the parameter calculation of an induction motor:

 

 

                         http://www.ene.ttu.ee/elektriajamid/teadus/artiklid/ungar965/

 

Hopethat it helps 😉 .

0 Kudos
Message 2 of 10
(5,930 Views)

Hi Nedelka,

 

In my opinion you should go through the formulas to set correctly the parameters of the model.

On the following link there are a series of formulas that might help you calcualte the correct parameters for the desired power.

http://www.ene.ttu.ee/elektriajamid/teadus/artiklid/ungar965/
Best regards,

IR

0 Kudos
Message 3 of 10
(5,988 Views)

Have you tried to calculate  the parameters and set it in the model?

 

Best regards,

IR

0 Kudos
Message 4 of 10
(6,026 Views)

Hi Nedelka,

In my opinion you should go through the formulas to set correctly the parameters of the model.
On the following link there are a series of formulas that might help you calcualte the correct parameters for the desired power.

 

Best regards,

Denis

0 Kudos
Message 5 of 10
(5,988 Views)

Hi again,

You can calculate the parameters from the formulas from the following link:

http://www.ene.ttu.ee/elektriajamid/teadus/artiklid/ungar965/

 


Best regards,
IR

Message 6 of 10
(5,989 Views)

Thanks for the tips :). I will try to calculate the parameters with these formulas. Also, i will post a result too.

Thanks again.

0 Kudos
Message 7 of 10
(5,979 Views)
Hi,
I apologize for the multiple posts with the same content. For some reason it was not posting therefor we tried multiple times.
IR
0 Kudos
Message 8 of 10
(5,975 Views)

хорошая статья! Спасибо за ссылку!

 

0 Kudos
Message 9 of 10
(1,832 Views)

Потестив асинхронный мотор на разных режимах, обнаружил следующие свойства модели: мощность зависит, в основном от индуктивности намагничивания (в рассматриваемой модели-51mH) 
Обратную задачу пока не знаю как решать, поэтому предлагаю варьировать индуктивностью намагничивания, затем корректировать сопротивление нагрузки.

tipa_0-1635813487228.png

4,9417 кВт нам выдала оригинальная модель. Попробуем создать модель на 1 кВт, уменьшаем в 10 раз, получаем следующую диаграмму, далее в 100 раз

tipa_1-1635813838786.png

tipa_2-1635814328157.png

tipa_3-1635814810699.png

остановимся на 1,2 кВт, хотя можно и дальше моделировать, кому надо точнее выйти на результат

tipa_4-1635815521619.png

 

0 Kudos
Message 10 of 10
(1,792 Views)