From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
03-03-2010 07:39 PM
Hi again.
I built this circuit but I keep getting the error message in the title. I have gone through the older threads on it but can find nothing to help. If I run the digital smaples they work fine. If I run other digital circuits I made they work fine. I have tried this circuit on another PC and get the same error.
Any help would be greatly appreciated.
Ray
03-03-2010 10:16 PM
03-04-2010 02:36 PM
Okay, I tried that. No good. Any other ideas?
Ray
03-04-2010 03:34 PM
03-04-2010 06:47 PM
Thanks, it works fine on my MS. I was planning on rebuilding the circuit to see if there was something I was doing wrong.
I may open the code and see what's different.
This is very strange. I even did a "repair" on Multisim.
Thanks again.
03-04-2010 07:09 PM
Okay, I built the same circuit and got the same error.
One thing I noticed is that on your fixed circuit the 7408 gates are all on different chips. I created the circuit using all the gates on one chip.
I am really confused.
Could it have anything to do with the fact that I am running this on W7 64bit?
03-04-2010 07:58 PM
I built the circuit again using different chips for each AND gate and it worked the first time. I did use the same chip for the Inverter gates.
I don't get it.
03-04-2010 08:06 PM
03-04-2010 08:20 PM