04-29-2015 02:14 AM
I've build a counter using D Flip Flops and am trying to display it on a 7-segment display using a 4511 BCD decoder. I get a convergence error when I have the C output connected (on the second page) to the DC input of the 4511. If I disconnect the DC input the counter works fine and the binary count can be seen on the indicators on the first page.
Any help would be greatly appreciated.
05-01-2015 09:29 AM
Hi techdude101,
take a look at this document here and try some of the steps towards the bottom.
I found changing the RELTOL tolerance to 0.01 allowed your simulation to run okay.
Hope that helps!
Charlotte N.
Applications Engineer
05-02-2015 03:42 AM
Thanks so much!!
Changing the RELTOL to 0.01 did the trick.
I also got it to work by changing the 4511 BCD decoder to a 7447 with a comon anode 7-segment display.
I've bookmarked that link and sent it to all my tutors.
Thanks again 🙂
05-05-2015 03:14 AM
Excellent, I'm glad your simulation is working. It is a very handy link as simulation errors such as yours are one of the most common Multisim issues.
Charlotte N.