06-03-2009 08:45 AM
The LabVIEW Instrument should appear as "SineWave" in the LV Instrument dropdown. I'll have one of the application engineers take a look. In the mean time, can someone else on the forums try this sines.llb to see if it is working?
Regards,
Patrick Noonan
Business Development Manager
National Instruments - Electronics Workbench Group
50 Market St. 1-A
S. Portland, ME 04106
Email: patrick.noonan@ni.com
Tel. (207) 892-9130
Fax. (512) 683-7754
06-03-2009 08:59 AM
Also make sure you have the compatability VIs for LabVIEW 8.6 as noted here...
http://zone.ni.com/devzone/cda/tut/p/id/5639
Regards,
Patrick Noonan
Business Development Manager
National Instruments - Electronics Workbench Group
50 Market St. 1-A
S. Portland, ME 04106
Email: patrick.noonan@ni.com
Tel. (207) 892-9130
Fax. (512) 683-7754
07-05-2009 05:13 AM
04-08-2018 01:57 PM
It would have been worth to mention that you have to set the field of Instrument ID and that of the display name in the block diagram of the yourfile_multisiminformation.vi in order to see it displayed into the simulation instrument menu of multisim.... .
..it took me one day to figure that out 😉