From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

BreakPoint

cancel
Showing results for 
Search instead for 
Did you mean: 

How measure magnetic field of the earth

Now, we have to measure "magnetic field of the earth", who can show me sensor or device, compatible with Labview,  that receive signal "magnetic field of the earth"? Thanks!
0 Kudos
Message 1 of 7
(6,709 Views)

This belongs into the LabVIEW forum: http://forums.ni.com/ni/board?board.id=170

 

0 Kudos
Message 2 of 7
(6,693 Views)

buy a Gauss meter with serial interface. This was done using asearch of the internet using "Gauss meter and Lanbview" as the search parameters.

http://forums.lavag.org/index.php?s=50a84cb241bcab38a26b35a9735e3e2e&showtopic=7361

 

Regards

Ray Farmer

Regards
Ray Farmer
Message 3 of 7
(6,664 Views)

Thank to Ray Farmer

If you don't mind, please send me your contact adress, I need some advices in this field. My email  cuong.tung@gmail.com

0 Kudos
Message 4 of 7
(6,656 Views)

Hi,

I dont really know much about 'measuring the magnetic field of the earth'.

Never had to do it, so I not sure I can offer any advice that would help you.Smiley Sad

Regards

Ray Farmer

 

Regards
Ray Farmer
0 Kudos
Message 5 of 7
(6,618 Views)


@rostov wrote:
If you don't mind, please send me your contact adress, ....

DIscussions should be conducted in the forum, so everybody has a chance to participate and/or learn! 🙂

You should also be more specific.

  • How much accuracy do you need? For a ballpark figure, you can probably look it up in a table for your location.
  • Do you need the field strenght or also the direction?

For a simple 3-axis magnetometer with computer interface, do a google search. There is plenty available, e.g.:

http://www.sparkfun.com/commerce/product_info.php?products_id=418

(Hey, if you look at the photo, it looks like the included software is already LabVIEW based! 🙂

 


0 Kudos
Message 6 of 7
(6,610 Views)
Thank you for your suggeestion and your link posted.
0 Kudos
Message 7 of 7
(6,599 Views)