
You are here:	NI Home > NI Developer Zone > NI Discussion Forums

Automotive and Embedded Networks

Show: - -

Subject	Replies	Author	Kudos	Latest Post
using usb-8473	4	D._Slimmer	2	‎06-14-2013 12:53 PM by Gibson
XNET Signal Conversion and Scheduling Questions	8	LVB	1	‎06-13-2013 04:39 AM by Munna232
Why need for ORing with 0x80000000 when setting xcp CRO DTO on CAN with id extended (29 bits)	6	Vincent_Gh	0	‎06-13-2013 01:06 AM by JB
Configuring Signal Values in NI-XNET database	1	SolPS	0	‎06-11-2013 12:16 PM by Nunnya
Do i need galvanic separation for CAN on sbRIO Boards	1	Flo.S	0	‎06-06-2013 09:22 AM by TinchoL
XNET Resample fails, bug? (Signal Waveform)	4	mdelsol	0	‎06-05-2013 11:50 AM by mdelsol
CAN Read in Single Cycle Timed Loop	1	MoEng	0	‎06-05-2013 04:21 AM by Jamie_J
TP in XNET	2	teststand	0	‎06-04-2013 03:31 AM by teststand
missing external function ni.can	3	diakrina	0	‎06-03-2013 11:38 AM by Bob_Y.
CAN RECEIVE VI	2	diakrina	0	‎06-03-2013 11:18 AM by diakrina
Question - using capl programming in canoe	3	Padderick	0	‎06-03-2013 01:42 AM by sans_p8
Read data from Can-Bus in LabView	2	LabViewBeginne…	0	‎05-31-2013 12:56 PM by sulekh
set node id and baudrate via lss (CANOpen)	7	Thomas87	4	‎05-27-2013 09:18 AM by Thomas87
0xBFF62002	1	Rayme	0	‎05-24-2013 04:14 PM by Dave.C
NI-CAN Error 0xBFF62002 [ 1 2 ]	10	RP_OCE_Poing	0	‎05-23-2013 08:09 AM by Rayme
USB-8473 + NICAN not able to request data through J1939	4	Cranky	0	‎05-22-2013 01:15 AM by JB
Industrial Communications for CANopen - interface create error	2	IvoK	0	‎05-13-2013 11:51 AM by IvoK
simple production control line	1	nooohhk	0	‎05-13-2013 09:13 AM by j_spin
single wire wiring for GM LAN	1	rgomez7408	0	‎05-09-2013 10:18 AM by jagutier
Can NI USB-8451 or NI USB-8452 be configured as an I2C SLAVE?	9	Alan_K	1	‎05-06-2013 02:30 PM by GPIB_Guru
can receive vi	2	yannis21	0	‎05-02-2013 02:29 AM by yannis21
How do I send a LIN diagnostic request with the second byte equal to or greater than 0x30 using XNET 1.7? [ 1 2 ]	15	jaime_c	0	‎05-01-2013 07:42 AM by kevin.key
Can bus reading	1	Ilia_art	1	‎04-27-2013 12:16 AM by Gibson
ni can 2.7.4 not showing up under NI max remote system	5	SRamirez	0	‎04-25-2013 12:40 AM by Gibson
Synchronize CAN read, CAN write and DAQmx	2	LievenD	0	‎04-24-2013 05:23 PM by LievenD
Does 9144 chassis work with 9853, 9862 or other CANBus?	1	Braggel	1	‎04-23-2013 09:03 AM by Jesse_D
CAN Single Wire using NI PXI-8513/2	4	rgomez7408	0	‎04-19-2013 04:20 PM by JuDa
PCI-CAN/XS2 Single wire configuration (cont)	9	Rich_G	0	‎04-19-2013 02:22 PM by Rich_G
PCI-CAN/XS2 Single wire causing fatal error [ 1 2 ]	16	Rich_G	0	‎04-19-2013 01:59 PM by Rich_G
Using X-NET C API	1	mdbeaster	0	‎04-17-2013 08:55 AM by mdbeaster

Subject	Kudos
Re : set node id and baudrate via lss (CANOpen)	1
Re : set node id and baudrate via lss (CANOpen)	1
Re: set node id and baudrate via lss (CANOpen)	1
Re: using usb-8473	1
Re: using usb-8473	1

User	Tag Count
manumohannair	37
Bill_in_Detroit	28
pgraebel	18
Shreyas	18
TBSCV	15



My Profile \| Privacy \| Legal \| Contact NI © 2011 National Instruments Corporation. All rights reserved. \| E-Mail this Page