02-23-2006 12:23 PM
02-23-2006 12:52 PM
02-23-2006 01:16 PM
02-23-2006 01:38 PM
02-23-2006 05:05 PM
Hi Kokitche,
Did you use any kind of Synchronization example, which uses typically timebase and trigger from a DAQ board?
If yes, in case of stopping this example, the timebase becomes disconnected and this means there is no timebase for the whole device (both ports on a 2 Port device).
If you run a second application at the same time on the second port, this error ocurs here.
DirkW