09-14-2015 07:22 PM
Hi Everyone
I have a myRIO -1900 and I am trying to connect my laptop webcam to that and acquire images from my laptop webcam and do analyze them on myRIO.
I guess I have installed all needed software, but I am not sure they are enough.
Would you please let me know how I can acquire images from laptop webcam for initial and basic works with myRIO?
I have attached the photos of NI MAX environment and what is installed in the laptop.
Thanks
09-15-2015 02:12 PM
Hello Meh,
I believe the first step will be to acquire the Vision Acquisition Software that is the one that allows us to interface with cameras. The VAS is composed by two drivers: IMAQ and IMAQdx:
http://digital.ni.com/public.nsf/allkb/0564022DAFF513D2862579490057D42E
As you can see on the document, we will need the IMAQdx driver in order to make the camera being recognized in NI-MAX. You can get the VAS (needs license) from this link:
http://www.ni.com/download/ni-vision-acquisition-software-august-2015-f1/5486/en/
Since it has a week of trail, we can try to test if the camera is going to be recognized.
I also found this forum with a similar discussion:
Warm Regards,
Randy Cespedes
Applications Engineering
National Instruments