I can't connect the USRP2 with my computer.

[Mic_Lin]

Hi!

I want to connect the Ettus Research USRP2 with my computer using the NI-USRP Utilities application.
But I encounter some promble, the NI-USRP Utilities application can't find the device.

I refer to the teaching of this web site. ( http://www.ni.com/pdf/manuals/375717a.pdf )

1. Installing the software:
Labview 2011
Labview Modulation Toolkit 4.3.2,
Labview Digital Filter Design Toolkit,
Labview MathScript RT Module,
and NI-USRP 1.0.

2. Default IP Address:
Host Ethernet Interface IP Address 192.168.10.1
Host Ethernet Interface Subnet Mask 255.255.255.0
Disable the firewall settings

The NI-USRP Configuration Utility can not find the USRP2.

And then I try to use the "uhd_find_devices" for finding the USRP2,
the result is:
------------------------------------------------------------------------------------------------------------------------
C:\Program Files\National Instruments\NI-USRP\utilities>uhd_find_devices
Win32; Microsoft Visual C++ version 9.0; Boost_104400; UHD_003.002.003-vendor
No UHD Devices Found
------------------------------------------------------------------------------------------------------------------------

Thank you!

[Sarah_Y]

This post was also posted on the USRP discussion forum and has been answered there.  Please refer to this post for the full discussion and resolution:

http://forums.ni.com/t5/USRP-Software-Radio/I-can-t-connect-the-USRP2-with-my-computer/td-p/1863665