08-01-2013 08:58 AM
I have control of the main output supply using the XG Series LabView VI's (DC850W). I would like the capability of enabling the AUX output via LabView control. I set the AUX output via the front panel to be on at power up, however when I run the DC850W example program the AUX output gets disabled.
08-02-2013 02:55 PM
Hi,
which LabVIEW VIs are you using? Were they part of a driver you downloaded? I've looked on our instrument drivers network and it seems the only driver available for that is the LabWindows/CVI drivers. If you could provide the VIs you are using or the location where we can find them, that would be very helpful in looking at this issue.
Thanks,
11-04-2013 01:00 PM
I downloaded the DC850W IVI LabView Driver from this page: http://www.sorensen.com/products/XTR/XTR_Downloads.htm. The file is this: http://www.sorensen.com/products/XTR/downloads/XTR_XG_LabVIEW_v1001.zip
11-04-2013 01:40 PM
The programming maual is here: http://www.sorensen.com/products/XTR/downloads/XG%201700_1500_850%20User%20Manual%20M370430-01%20Rev.... On page 3-17 it describes how to Enable the Auxiliary Output, however there is no LabView Adapter for "
[:]OUTPut[<channel>]:AUXiliary[:STATe]" . This there a way to make that into LabView?
11-04-2013 03:52 PM