From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
12-05-2012 02:00 PM
Hi!
I'm pretty new in labviewscene and I would like to build a VI which allows me to send a continuous voltage signal acquired with a daqmx device through rs232 interface to a digital display.
I have working examples of both daqmx acquiring signal and rs232 input and output, but I can't convert the daqmx signal to the apropriated serial protocol that rs232 could transmit. Is that possible?
Can someone tell me which function should I use to do this?
thanks a lot, Ivan
12-05-2012 07:35 PM
12-06-2012 01:33 PM
Hellow Dennis Knutson,
I'm trying to send a pre-amplified signal (loadcell) acquired by a USB-6008 (http://sine.ni.com/nips/cds/view/p/lang/pt/nid/201986) and also text messages through a serial port via RS232 to a digital display. There is no standard protocol for the display yet, it could be ASCII for instance or some other as well.
thanks in advance!
12-06-2012 02:01 PM
When you know the format that the display requires, post back with that information. You cannot do anything until you have that information.
No need to post a link to the 6008.
12-06-2012 02:26 PM
It will be a ASCII format. Do need some other specific information?
I sorry for that, I'm not familiar with this area. Indeed, I don't not even study it.
12-06-2012 09:03 PM